How to Install and Level Equalizers and Lifting Cables


The first step to installing and leveling a vehicle's equalizer is to drill a hole in the chassis. Careful attention must be paid to not damage the gas tank or the brake line. The equalizer is powered by a 12V power cable. This red or blue wire connects to the vehicle's variable power source or receiver power cable.


Equilibrium of equalizer or lifting cables is a fundamental phenomenon in lifting equipment. Generally, this mechanism works by distributing tension in wire ropes between a load and the lifting equipment available at Mechanic superstore has lot for you can consider. It is a complicated mechanism, but it is not impossible to simulate it with physics-based simulations. Instead of using fixed pulleys, simulations use mass-less constraint-based wire ropes to reproduce the real equalizer mechanism.

Equilibrium of equalizer or lifting cables is an important safety consideration. It helps prevent a lift from being overloaded or under-stressed, which can lead to costly repairs and downtime. It also ensures the overall performance of the lifting system. A hydraulic rope equalizer will reduce the risk of damage by equalizing tension evenly across the cables. In addition, this feature will extend the lifespan of the cables and save on maintenance costs.

The wire cable pull equalizer device belongs to a ship lift fixture. It consists of two parts: a tension machine and a big balance lever with a middle pin shaft. It is connected to a tension machine via small pin shafts on the two ends.


When the equalizer or lifting cables start to show signs of wear, it may be time to replace them. A cable may need to be replaced when it stretches by 10 percent of its original size, which is particularly important if it is being used to lift heavy-duty vehicles. To detect wear and tear, look for signs of corrosion, pits, kinks, bird-caging, and heat damage.

When you're preparing to replace a cable, always remember to replace all of the components, including safety devices. A good place to find replacement parts is SVI. They offer a large variety of standard and custom cables, and they ship same-day. You can also order custom cables for your lift, depending on the specific needs of your business.

To ensure that your 2 post car lifts or 4 post car lifts' equalizer or lifting cables are in good condition, make sure you do regular inspections of them. Cables are subject to stretching and fraying over time, so regular weekly or monthly maintenance is necessary. The tension of the cables is crucial in ensuring that the carriages rise evenly. Most customers don't realize that even one loose cable or stretched cable can cause the carriages to rise unevenly.


If your lifting cables or equalizer are not working properly, you may need to troubleshoot them. This problem can be caused by a few different things. The first thing to do is to determine whether your system is receiving power. You can test this by making sure that the battery disconnect is set to "off." If you still cannot receive power, it is probably the controller that's to blame. You can check the controller by using a voltmeter. If that doesn't fix the problem, you can replace the keypad or controller.

Next, check to see if your equalizer is properly leveled. If it is not, you can reset the level using the equalizer's SmartLevel. To do this, press and hold the "Auto Level" button for 5 seconds. If the equalizer is still on the same level as your lifting cables, try a different setting.